INSTALLATION
ATTENTION: THIS APPLIANCE MUST BE INSTALLED BY A TECHNICIAN IN
COMPLIANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER.
BEFORE DOING ANY WORK ON THE APPLIANCE, MAKE SURE IT IS DISCONNECTED
FROM THE POWER SUPPLY.
Legislative standards, technical regulations and directives
Installation of the device must be carried out in compliance with current legal standards
and with applicable safety standards
Oven installation:
The oven must be installed in a module with dimensions of 600 mm, built into a set of
furniture. It is necessary to provide an opening of at least 85/90 mm both above and below
the furniture unit to allow proper ventilation of the appliance (see figure 5).
During installation, do not lift the oven by the door. Generally speaking, do not subject the
oven to any sort of stress.
Fig. 5
78
