Step 4. Dishwasher installation steps
1.
Affix the condensation strip under the work surface of cabinet. Please ensure the
condensation strip is flush with edge of work surface. (Step 2)
2.
Connect the inlet hose to the cold water supply.
3.
Connect the drain hose.
4.
Connect the power cord.
5.
Place the dishwasher into
6.
Level the dishwasher. The rear foot can be adjusted from the front of the
dishwasher by turning the Philips screw in the middle of the base of dishwasher
use Philips screw
. To adjust the front feet, use a flat screw driver and turn
the front feet until the dishwasher is level. (Step 5 to Step 6)
7.
Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)
8.
Adjust the tension of the door springs by using
turning in a
clockwise motion to tighten the left and right door springs. Failure to do this could
cause damage to your dishwasher. (Step 11)
9.
The dishwasher must be secured in place. There are two ways to do this:
A.
Normal work surface: Put the installation hook into the slot of the side plane
and secure it to the work surface with
B.
Marble or granite work top: Fix the side with
.
the cabinet.
a
driver
a Philips screw driver
the screws.
screws
A
B
24
Please refer to the specific installation steps in the installation
drawings.
Please refer to the
installation steps in the installation
drawings.
specific
Содержание DSI 44700 SS
Страница 1: ...www teka com User Manual DSI 44700 SS EN...
Страница 51: ...www teka com...