background image

14

ENG

Dear client:

Congratulations on your choice. We are sure
that this  modern, functional and practical
apparatus, made with top quality materials,
will fully satisfy your needs.

Please read every section of this
INSTRUCTIONS MANUAL before using your
kitchen hood for the first time, to be able to get
maximum performance from the apparatus
and to avoid breakdowns which may be
caused by  incorrect use, as well as to allow
any minor problems to be solved.

Store this manual, as it will provide useful
information about your kitchen hood at all
times and will also help other people to use it.

• Please be aware of current local

regulations with reference to domestic
electrical fittings and gas eduction.

• Verify that the tension and frequency of the

network match those indicated on the label
located inside the kitchen hood.

• The apparatus must be connected to the

network using a break switch with a
universal cut off and minimum contact
separation of 3 mm.

• Once the kitchen hood has been installed,

ensure that the feed cable to the network is
not in contact with any live metal edges.

• Avoid connecting the apparatus to

conductors used exits for fumes produced
by a non-electric energy source. E.g.:
boilers, chimneys, etc.

• If the extractor fan is going to be used

simultaneously with equipment powered by
a non-electric energy source. E.g.:  gas
cookers, the room must have sufficient
ventilation.

• Excessive fat accumulation in the kitchen

hood and metal filters is a fire risk and may
also cause dripping, so the inside of the
kitchen hood and the metal filters must be
cleaned at least once a month.

• The lower part of the kitchen hood must be

fitted at least 50 cm. over electric hobs and
65 cm. over gas or mixed hobs.

• Never leave gas hobs lit if not covered by a

container. The fat accumulated in the filters
may drip or catch fire when the
temperature increases.  

• Avoid cooking under the kitchen hood if the

metal filters are not fitted, e.g.: while they
are being cleaned in the dishwasher.

• You must not produce flames under the

kitchen hood.

• Disconnect the apparatus before any

interior manipulation. E.g. during cleaning
or maintenance.

• We recommend the use of gloves and to

be extremely careful when cleaning the
kitchen hood's interior.

• Your kitchen hood is designed for domestic

use and only for extraction and purification
of gases produced during food preparation.
It will be your responsibility if it is used for
other purposes, which may be dangerous.
The manufacturer cannot accept responsi-
bility for damage caused by improper use
of the apparatus.

• For repairs please contact the nearest

TEKA Technical Assistance Service, and
always use genuine spare parts. Repairs
or modifications effected by unqualified
personnel can cause malfunctions or may
damage the apparatus, putting  your safety
in danger.

Safety Instructions

Manual DE TEKA2.qxd  15/02/2005  9:07  Page 14

Содержание DE 60.2








Отзывы: