Tek-Trol TEK-LCD 7800A-0L1, Инструкция по эксплуатации, Страница: 17 / 36

•
Hold MENU, at any time, to exit and return to Run Mode. Changes made to settings prior to pressing
ENTER are not saved.
•
Press the MENU button during Programming Mode to return to return to the previous menu
selections.
•
Changes to the settings are saved to memory only after pressing ENTER .
•
The display moves to the next menu every time a setting is accepted by pressing ENTER .
3.5 Setting Up the Meter ( SETUP )
The Setup menu is used to select:
1.
Engineering unit’s decimal location
2.
Engineering units display scale
3.
Tank indicator full and empty values
4.
Bottom display selection
Press the ENTER button to access any menu or press UP arrow button to scroll through
choices.
Hold
MENU , at any time, to exit and return to Run Mode. Changes made to settings prior to
pressing ENTER are not saved.
Press the MENU button during Programming Mode to return to return to the previous menu
selections.