Teison TS-PEC-002, Инструкция по эксплуатации

Страница: 7 / 7


Step 4. Factory default current is 13A, please press the button of "CURRENT
SETTING" if it does not match the charging requirement. The current increases 1A
while press once. The current will be the minimum value (6A) when continue to
press once if the current is 16A OR 13A.The device reproduces the last setting
when we charge next time.
How to Stop Charging

Step 1. Press the button and disconnect the charging connector from the vehicle
inlet.

Step 2. Close vehicle protective cap, put on the protective cap of charge connector.

Step 3. Disconnect the plug from the outlet.

Step 4. Pack up the charging cable and put into the bag.
WARNING
Please make sure the rated current of the socket, and adjust the charging current , be sure
to shall not exceed this value.
Do not place the charging cable near high temperature object when charging.
Security Statements
Charging equipment has high pressure inspection before they go out test, during the
product trial, consumer can be at ease use.