Tecai electropneumatic brushing robot
24-34
operating instructions
After finishing the job, place the selector button in STOP mode in order to be able to remove the brush from
the duct and disassemble it.
Stopping your TECAI ELEMENT:
6
Once you have turned off your TECAI ELEMENT AUTO and
you have turned off the compressed air generator, the brush
rotation should be operated so as to release the compressed
air that has remained trapped in the circuit. On having released
the residual pressure from the circuit, remove the head with the
brush from the duct, reel in the hose and then close the shut off
valve for the compressed air inlet on your TECAI ELEMENT
AUTO as shown in the image.
Remove the compressed air inlet connector from your
TECAI ELEMENT AUTO in the way shown in the image.
Remove the connector from the outlet on the compressed air
generator in the way shown in the image. An AR20
is shown in the image.
