9
hydromassage - completing the hydromassage
Hydromassage stopping can be performed
» by
depressing
the STOP button, all active sections of nozzles will switch of
» by depressing the STOP button, all active sections of nozzles will switch of
» by opening the shower door – automatic blockage of the system
hydromassage - completing
heating of hydromassage
CAUTION – fill the small bath tub always with warm water (recommended temperature 38°C),
the additional heating to the required temperature can be started only when the hydromassage
is running, i.e. at water circulation.
Temperature setting for additional water heating
» after the button
is depressed, the actual water temperature is displayed
» the required additional water heating is set by means of step
buttons range : 18 – 40°C
» after 10 seconds the actual water temperature is displayed
» by another depressing
the button, the through-flow heater (yellow diode) will start
if the hydromassage is running, upon transfer to another function – green diode
(at heating) upon another depressing the button, the additional heating switches off and the
red diode goes on
heating of hydromassage
programs of hydromassage
The hydromassage box contains three pre-selected programs, which can be modified when
running (selection of nozzle section, intensity of water stream, additional water heating, mas-
sage duration)
Pre-selected programs
»
BLUE LINE program
pulsing of hydromassage in individual sections
»
FITNESS
program
changing the hydromassage sections without pause
»
RELAX
program
changing the hydromassage sections with short pause
programs of hydromassage
