Shine Plus Maxi Digi
User Manual
Version
0.0.9
Page 21 of 64
CV15. For this reason the values used are limited to the range 1-7. If
the secondary address of the decoder is forgotten within 7 iterations
it can be found.
This way of accessing / programming of the decoder CVs is useful in
case of railcars, or permanently connected sets, which have more
decoders built in, and it would be very inconvenient their
programming in the traditional way (on Programming Track all
decoders would be programmed with the same CV values, what most
likely is not desired).
Assigning secondary addresses to each decoder of the railcar or
carriage sets, when placing them on the Programming Track, only
the decoder for which the CV15 = CV16 will be programmed. In this
way we can program several decoders independently, even if they are
on the programming track in same time.
16.
User data
CV105 and CV106 are two CVs that can be used to store user
identifiers (serial number, etc.). The particularity of these two CVs is
that after a reset their contents will not be erased.
17.
Other functions
The on board decoder
has implemented
a function
to save the
last
function command
received
.
This feature
can be a
ctivated
programming the decimal value 1 in CV152.
With this feature
activated, the decoder
will start up activating the functions
that were
active
before
power
interruption
,
even if
DCC
commands
were not
received
to activate these functions.
