9
10
7. Hold the tool firmly.
8. Make sure the blade is not contacting the workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool. only when hand-held.
11. Always switch off and wait for the blade to come to a complete stop before removing the
blade from the workpiece.
12. Do not touch the blade or the workpiece immediately after operation; they may be extremely
hot and could burn your skin.
13. Do not operate the tool at no-load unnecessarily.
14. Always use the correct dust mask/respirator for the material and application you are working
with.
15. Some material contains chemicals which maybe toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety data.
16. Before operation, make sure that there is no buried object such as electric pipe, water pipe or
gas pipe in the workpiece. Otherwise, the recipro saw blade may touch them, resulting an electric
shock, electrical leakage or gas leak.
Always be sure that the tool is switched off and unplugged before adjusting or
checking function on the tool.
NOTE
INSTALLATION INSTRUCTION
INSTALLING OR REMOVING THE RECIPRO SAW BLADE
Always clean out all chips or foreign matter adhering to the blade and around the
blade clamp. Failure to do so may cause insufficient tightening of the blade,
resulting in a serious injury.
WARNING
Before installing the recipro saw blade, rotate the blade clamp lever (part of the blade clamp
sleeve) to released position. After installing the saw blade, the blade clamp will automatically return
to locked position.
Insert the recipro saw blade into the blade clamp as far
as it will go. The blade clamp sleeve rotates and fixes the
recipro saw blade. Make sure that the recipro saw blade
cannot be extracted even though you try to pull it out.
1
2
1. Recipro saw blade
2. Blade clamp sleeve
If you do not insert the recipro saw blade deep
enough, the recipro saw blade may be ejected
unexpectedly during operation.
This can be
extremely dangerous.
WARNING
To remove the recipro saw blade, rotate the blade clamp lever in the counter-clock direction. Pull
the recipro saw blade when the blade clamp is in released position.
Keep hands and fingers away from the lever during the switching operation. Failure
to do so may
cause personal injuries.
WARNING
