15
16
OPERATION INSTRUCTION
Always be
sure that the tool is switched off and unplugged before adjusting or
checking function on the tool.
WARNING
ADJUSTING DEPTH OF CUT
Loosen the clamping screw on the depth guide and move the base up or down. At the desired
depth of cut, secure the base by tightening the clamping screw.
For cleaner, safer cuts, set cut depth so that no more than one blade tooth projects below
workpiece. Using proper cut depth helps to reduce potential for dangerous KICKBACKS which can
cause personal injury.
After adjusting the depth of cut, always tighten the clamping screw securely.
WARNING
BEVEL CUTTING
Loosen the clamping screw on the bevel scale plate on
the front of the base. Set for the desired angle (0° -
45°) by tilting accordingly, then tighten the clamping
screw securely.
1. Bevel scale plate
2. Clamping screw
1
2
SIGHTING
For straight cuts, align the A position on the front of the
base with your cutting line. For 45° bevel cuts, align the
B position with it.
1
A
B
1. Base
SWITCH ACTION
To prevent the switch trigger from being accidentally pulled, a button lock-off button is provided.
To start the tool, push in the lock-off button and pull the switch trigger. Release the switch trigger
to stop.
Before plugging in the tool, always check to see that the switch trigger actuates
properly and returns to the“OFF”position when released.
WARNING
