visio
nano
Duct inspection system
page 12
operating instructions
Guía de funcionamiento
Basic operation:
1. Turn the ON/Off switch to activate the camera; the power indicator will light up. The switch then acts as
controller for the LEDS on the end of the camera.
2. Press and hold the power switch for at least 2 seconds and the power indicator will light up green.
3. Before attaching the monitor to the body of the machine, press the arrow down button to select a channel, the
image will appear on the LCD screen.
4. Use arrow up to select video or photo mode.
5. Turn the ON/OFF switch to adjust the image.
6. You can easily manipulate the flexible shaft into the desired position.
7. Use the accessories supplied to help recover small items or view complex angles.
Taking a picture:
In photo mode, press OK to take a photo. The photo will be automatically saved on the SD card.
Video recording:
In video mode press OK to begin recording; consult the meaning of the icons on the screen in section 3.a “Display”.
