ARRI 3
LED Spotlight - 24VDC
415-504-3536
415-504-3534 INS-ARRI 3 8/17/18
•
•
www.teganlighting.com
2
Tegan Trac
Installation Instructions
Ho
rixo
nt
al & V
er
tical
A
d
jus
tm
ent
2. Locking the ARRI 3 LED in Horizontal and Vertical Adjustment
• Adjust to desired position, using angle gauge if required.
• Lock in position using 2mm Allen key provided.
• NOTE: Only adjust position when unlocked.
2.
Ins
tallin
g O
p
tic
3.
Horizontal Adjustment
Vertical Adjustment
Centro Trac channel
Media
Optic
Media Holder
4. Installing ARRI 3 - CTC to Centro Trac (only):
• ARRI 3 is supplied with an factory installed integral Centro Trac System Connector.
NO NOT TRY TO REMOVE;
DAMAGE WILL OCCCUR TO THE SPOT AND WILL VOID THE WARRANTY.
• Top cap unscrews/screws to attach to Trac. Check to ensure the cap is tightened securely for proper electrical connection
and operation.
3. Removing and Installing an LED Optic
• Unscrew front shield to install an alternative optic.
• Line up the optic’s “pegs” with indents on LED board.
• Carefully place optional Media inside the Media Holder.
• Tighten Media Holder until snug.until snug.
• Media Holders are only compatible wih a fixed number of Media, or optics only.
NOTE: Do not exceed maximum number of Spotlights per driver wattage rating, doing so will damage system.
Confirm 0-10V dimming controls
compatibility with Driver Manufacturer
.