Tegam 2411B, Руководство по эксплуатации

Страница: 36 / 140

Chapter 3 Front-Panel Menu Operation
System Control
System Control
A: UTIL (Utility) menu
1: SCLK Select the sample clock source.
2: RCLK Select the reference clock source and make a fine adjustment to the
internal reference clock.
3: TGIN Select the trigger type for multi-phase or single unit operations.
4: TGEN Select the internal trigger generator and the trigger rate.
5: MBST Select and display the monitor burst count.
6: GPIB Set the GPIB bus address (0-30).
7: R232 Set the RS232 serial interface parameters.
B: LOCAL
Select the front panel control when the instrument is in remote
mode. Press SHIFT
button and then press LOCAL (or number 8 key)
C: STOR/RECL
Store and recall 31 sets of the 2411B status. Press ENTER to activate the recalled set
tings.
D: RESET
Reset the 2411B. Press SHIFT button and then press RESET (or number 9 key). Select
either ALL or CURR .
E: RTS
Return to start address. Press SHIFT button and then press RTS (or /- key).
F: HOLD
Hold the output at the current level until released. Press SHIFT button and then press
HOLD .
G: TRIG
Manual trigger button. Initiates GATE, TRIG, BURST and TOGGLE mode.
H: LCD
Adjust the LCD screen viewing angle. Press SHIFT button and
then press LCD . Turn knob to adjust viewing angle.
3-5
1: SCLK 2: RCLK 3: TGIN 4: TGEN 5: MBST 6: GPIB 7: R232