7
Thermostat
The thermostat is placed under the cabinet.
The thermostat can be positioned from app. 2 to 12 ºC.
A positioning in app. the middle of the scale will in must cases be ideal.
Turn the thermostat button clockwise if the temperature is too high or anti-clockwise if the
temperature is too low.
Defrosting
The cabinet defrosts automatically. Defrosted water runs to a container placed in the compressor
compartment and evaporates.
Maintenance and cleaning
Switch the cooler off at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet
with a light soap solution and subsequently wipe dry.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the
surfaces and the internal cooling system.
Do NOT hose the compressor compartment with water as this can cause short circuits and damage
on the electrical parts.
Service
The cooling system is a hermetically sealed system and does not require supervision, only cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the freezer, please contact your supplier. Please
inform model and serial number of the cabinet. You can find this information on the rating label
which is placed inside the cabinet in the top right hand side.
Disposal
Disposal of the cooler must take place in an environmentally correct way. Please note existing
regulation on disposal. There may be special requirements and conditions which must be observed.
