10
Light
The internal light is a LED type, witch automatically switches on when the door is opened.
Replacing the LED-strip is done by removing the lamp cover and disconnect the wires.
Replace with similar type of LED-strip (12 VDC).
Defrosting
The cabinet defrosts automatically. Defrosted water runs to a container placed in the compressor
compartment and evaporates.
Moving the shelves
The shelf guides is moved by squeezing them together and lifting them upwards at the same time.
Place the guides in the wanted position and be sure that all 4 guides are placed in the same height
before placing the shelf in the cabinet.
Maintenance and cleaning
Switch the cooler off at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet
with a light soap solution and subsequently wipe dry.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the
surfaces and the internal cooling system.
Service
The cooling system is a hermetically sealed system and does not require supervision, only cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the cabinet, please contact your supplier. Please
inform model and serial number of the cabinet. You can find this information on the rating label
which is placed inside the cabinet in the top right hand side.
Disposal
Disposal of the cabinet must take place in an environmentally correct way. Please note existing
regulation on disposal. There may be special requirements and conditions which must be observed.
