3
E
NG
• This equipment complies with current safety regulations
and requirements as well as directives:
- 89/336/CEE modified by 93/68/CEE
- 73/23/CEE modified by 93/68/CEE
• This electrical equipment operates at high temperatures
which may cause burns. Although this deep fryer offers a
high level of thermal protection, do not touch metal parts
that are visible after opening the lid.
• Do not leave the equipment switched on while
unattended.
• Never insert any object between the removable bowl and
the bottom of the equipment.
• Always plug in the equipment at an earthed power
socket.
• Do not use an extension lead. If you accept liability for
doing so, only use an extension lead which is in good
condition, has an earthed plug, and is suited to the power
of the equipment.
• Check that the mains voltage corresponds with that
shown on the equipment (alternating current only).
• If the equipment is used in a country other than that of
purchase, have it checked by an approved Service
Centre.
• Never use or plug in your equipment if:
- its power lead is faulty or damaged,
- the equipment has been dropped,
- it has visible damage or operating faults.
• In such cases, to avoid any danger contact your nearest
approved Service Centre to have the equipment repaired,
as special tools are needed. Never disassemble the
equipment yourself.
• If the power lead is damaged, it must be replaced by the
manufacturer, its after-sales service or someone similarly
qualified, in order to avoid any danger.
• In the event of fire, never try to extinguish the flames with
water. Close the lid. Smother the flames with a damp
cloth.
• Do not switch on the equipment near to inflammable
materials (blinds, curtains, etc.) or close to an external
heat source (gas stove, hotplate, etc.)
• This equipment has been designed for domestic use only.
Any professional use which is inappropriate or does not
comply with the instructions for use disengages the
manufacturer from his liability or guarantee.
Safety instructions
For UK users only - Wiring instructions
Warning:
this appliance
must be earthed.
Important:
the wire in this lead are coloured in accordance with
the following codes :
Green and Yellow . . . . . . . . Earth
Blue . . . . . . . . . . . . . . . . . . Neutral
Brown . . . . . . . . . . . . . . . . . . . Live
• Connect the Green/Yellow wire to the terminal in the
plug marked “E” (or by the earth symbol) or
coloured Green or coloured Green and Yellow.
Connect the Brown wire to the terminal in the plug
marked “L” or coloured Red. Connect the Blue wire
to the terminal in the plug marked “N” or coloured
Black. A 13 amp fuse should be fitted when the
appliance is connected to a BS 1362 plug. Seek
professional advice if you are unsure of the correct
procedure of the above.
Voltage
• This appliance is designed to run on 230 volts only.
Check that the mains supply corresponds to that
shown on the rating plate of the appliance. If the
appliance is to be used in any country other than that
of purchase, it should be checked by an approved
Service Dealer. Standards can vary from country to
country.
About your factory fitted plug.
FOR UK ONLY
(supplied with certain models only)
• The lead is already fitted with a plug incorporating a
13 amp fuse. If the plug does not fit your socket
outlet, see next paragraph.
• Should you need to replace the fuse in the plug
supplied, a 13 amp approved BS 1362 fuse must be
used.
• The fuse cover is an important part of the plug.
Please ensure that it is always refited. If you lose
this cover please do not use the plug. You may
contact TEFAL for a replacement.
• If the plug supplied does not fit your socket outlet, it
should be removed from the mains lead and
disposed of safety. The flexible cord insulation
should be stripped back as appropiate and a
suitable alternative plug fitted. The replacement
plug must be equipped with a 13 amp fuse.
Important:
if the electrical cord of this appliance is damaged, it
must only be replaced by an authorised Service
Dealer. The safety of this appliance complies with the
technical regulations and standards in force.
