Thank you for purchasing this Tefal water heater. Please read the instructions common to all of our
models carefully and keep them in a safe place..
Product description (
fig. 1
)
Rinsing before using for the first time
1 Remove all of the packaging, stickers or accessories from the interior and exterior of the appliance.
2 Remove the tank
A
and clean it in water, taking care that no particles remain in the tank.
3 Then fill the tank
A
with cold water and reposition it firmly on its base
D
, making sure that the release
valve C is properly engaged
fig 1a
,
1b
and
2.
4 Plug in the appliance.
5 Place a container that holds approximately 1.5 litres under the nozzle
E.
6 Hold down the hot water button
H
: hot water will begin to run out
fig 3.
When operating for the first time, it is normal that a little steam escapes from the nozzle
E
.
7 When the container is almost full, release the hot water button
H
to stop the flow. Discard the water.
Installation of the CLARIS filter cartridge
(according to model)
• To get the best taste and performance from your appliance we advise you to use the Claris Aqua Filter
System cartridge. This cartridge contains an anti-lime substance and activated carbon that reduces
chlorine, impurities, lead, copper, pesticides, etc that are present in water. Minerals and trace elements,
however, are preserved.
1 Unwrap the cartridge J. Take note of the month in which the cartridge is put into use by sliding the upper
ring on the filter to the use start date
fig 4
. You should change your Claris Filter Cartridge every 4 to
6 weeks (or every 50 litres), according to the hardness of your water.
2 Position the cartridge in the tank
A
and screw the cartridge
J
a quarter turn into the bottom of the tank.
Certain models also have an indicator light
K
, which indicates when it is necessary to change the cartridge.
For these models, when this light
K
flashes during use, it is time to change the cartridge
fig 5
.
3 To change the cartridge, remove the used cartridge and replace it with a new Claris Aqua Filter system
cartridge, sold as an accessory (ref XH 5000)
fig 6
.
4 For models with an indicator light, it is necessary to record the change of cartridge by simultaneously
pressing the hot water button
H
and the ambient water button
G
, for at least 5 seconds
fig 7.
After 5 seconds, the indicator light will go out. The appliance will then have recorded the cartridge change.
• The Claris Aqua Filter cartridge can be installed in all Tefal Quick Cup models, including those that do not
have a filter on purchase.
5
A
water tank
B
tank lid
C
water release valve
D
body of the appliance
E
nozzle or water outlet
G
Ambient temperature button
H
hot water button
I
quantity selector (according to model)
J
filter cartridge (according to model)
K
cartridge change and descaling indicator light
(according to model)
Notice Tefal GB:Mise en page 1 19/03/07 17:21 Page 5
All manuals and user guides at all-guides.com
