TEFAL Pro Style IT34 Series, Руководство пользователя

Страница: 6 / 28

6
TROUBLESHOOTING
Problems Possible causes Solutions
There is no steam. The appliance has not
been switched on. Check that the appliance has been
plugged in correctly. Press the On/Off
button.
The appliance will begin producing steam
after approximately 45 seconds.
The hose has been
obstructed. Check that the hose is not bent or twisted.
Check that the steam head is not laying
down on the floor.
There is no water left in
the water tank. Switch off the appliance and fill the water
tank.
The steam flow is
low. Your steamer has a build-
up of scale because it
has not been rinsed out
regularly or descaled. Follow the «easy descaling» process.
The hose has been
obstructed. Check that the hose is not bent or twisted.
Water runs through
the holes of the
steam head. There is condensation in
the hose. Never use the steamer in the horizontal
position. Hold the hose vertically
outstretched and wait for the condensed
water to return to the steamer.
The steamer takes
a long time to heat
and/or ejects white
particles. Your steamer has a build-
up of scale because it
has not been descaled
regularly. Follow the «easy descaling» process
The Press & Steam
accessory is crooked. The Press & Steam
accessory has not been
assembled properly. Reassemble the Press & Steam accessory
inside the integrated hanger.
Make sure it is properly hooked in place by
following the instructions.
The Press & Steam
accessory has not been
rolled properly. Make sure the Press & Steam accessory
is always dry then rolled with care when
stored. Do not crease it for storage.
The Press & Steam
accessory detaches
while in use. The Press & Steam
accessory was not locked
correctly in the hook. Make sure the Press & Steam accessory
handle is firmly locked in the hook. It
should not be moving horizontally or
vertically.
Make sure the 4 segments of the pole are
fully extended and that the 3 clips are
firmly locked.