TEFAL Liberty, Руководство пользователя

Страница: 18 / 21

18
Before using the iron for the first time, or if you have not used the steam button for a long time, press the steam
control button several times in a row, holding the iron away from your clothes.
•
Iron temperature setting:
SETTING THE TEMPERATURE AND STEAM OUTPUT ACCORDING TO TYPE OF FABRIC TO BE IRONED
TYPE OF FABRICS Setting temperature control
Synthetics, Silk
Wool, Viscose
Cotton
Linen, Max
-
MAX
- Start with the fabrics to be ironed at a low temperature (•) and finish with those which need higher temperatures
(••• or Max).
- Mixed fibre fabric: set the ironing temperature to the setting for the most delicate fabric.
• If you put your thermostat in the “min” position, the iron does not heat.
Steam boost function
• Your appliance includes the Steam boost: automatic sequential steam for effortless use. To be used in particular
for thick fabrics.
• To obtain this function, press the steam control button under the handle three times in quick succession.
ECO MODE: Your appliance has an ECO mode function which uses less power whilst still producing a good steam
flow to iron your garments properly.
Dry ironing
• Do not press the steam control button under the iron handle.
Vertical steam ironing
Recommendations : for fabrics other than linen or cotton, hold the iron a few centimetres from the garment to avoid
burning the fabric.
• Set the iron temperature control dial to the MAX position
• Hang the garment on a coat hanger.
As steam is very hot : never attempt to remove creases from a garment while it is being worn, always hang
garments on a coat hanger.
• Holding the iron in a vertical position, press repeatedly on the steam control button (underneath the iron handle)
moving the iron from top to bottom.
Refilling the water tank
• Switch off then unplug the appliance.
• Remove the detachable water tank using the handle (located at the front of the steam generator)
• Fill the water tank without exceeding the Max level
• Push it back into its housing until you hear a «click»
• Plug in and switch the appliance on again by pressing the on/off switch.
Anti-calc maintenance
Cartridge
Do not put any descaling substances (vinegar, industrial descaling products, etc.) in the water tank or in the anti calc
cartridge compartment, they could damage your appliance.
To extend the life of your appliance and to avoid scale build up, your appliance is equipped with an anti calc cartridge
system. This anti calc cartridge system is located in the water tank rest.
The cartridge will need to be changed only when the anti-calc indictor flashes which will depend on your frequency
of ironing and how much steam you use.
Operation: