TEFAL FV9604, Руководство пользователя

Страница: 20 / 50

16
Self-cleaning
• Put the steam button on max.
• Place the iron on its base with a full tank and set the thermostat to the "MIN"
position.
• When the light goes out, disconnect the iron and place it over a sink.
• Remove the anti-calc valve.
• Shake the iron lightly and horizontally above a sink until part of the water (with
the impurities) flows from behind the appliance
– fig.15.
• Once you have finished this operation, replace the anti-calc valve, inserting it
until you hear a click – fig.16.
• Plug in your iron and let it stand on its base for 2 minutes in order to clean the
soleplate.
• Unplug your iron and when the soleplate is lukewarm, dry it with a soft cloth.
• When you next use your iron, switch it on in the horizontal position, holding it
away from you, to remove any water and limescale residue left in the baseplate.
Cleaning the soleplate
Your steam iron is equipped with a self-cleaning soleplate (depending on
model):
• Its exclusive active coating eliminates all impurities that can be generated under
normal conditions of use.
• Ironing using the incorrect temperature could however leave traces that require
manual cleaning. In this case, it is recommended that you use a soft damp cloth
on the still warm soleplate so as not to damage clothing.
Your steam iron is equipped with the Ultragliss soleplate (depending on
model):
• Clean with a damp non-metallic sponge or damp soft cloth while the soleplate
is still warm.
Storing your iron
• Unplug it and wait for the soleplate to cool down –
fig.18.
• Empty the tank and set the steam control to . A little water may remain in the tank.
• Wind the cord around the heel of the iron. Position the iron on its support base – fig.19.
The self-cleaning function
helps to slow down scaling
in your iron. In order to
extend the life of your iron,
use the Self-Cleaning
function once a month.
Do not use corrosive or
abrasive products.
Warning! Using any
abrasive sponge damages
the self-cleaning coating
(according to model) of
your soleplate – fig.17.
1800128785_01_FV96XXM0G0_110x154 15/04/13 17:19 Page16