Step 3
Assemble the 3-Hole Roller Hinges (F5-1065) to the Table Bed (F1-1300)
• For ease-of-assembly, rest the Table Bed against the Crossbar (Figure 7).
• Open the Cam Locks on each side of the Table Bed (Figure 8).
• With the Pivot Pins facing outward, insert the Roller Hinges into the brackets on each side
of the Table Bed Assembly. The Roller Hinges must slide between the Cam Locks and the
Brackets (Figure 8).
• Engage one of the holes in the Roller Hinge over the Bracket Pin. Make sure the Roller
Hinges are in the same hole setting on both sides. Figure 9 shows the Roller Hinges
engaged correctly in Setting C.
• Push down on the Cam Locks (Figure 10) to secure the Roller Hinges.
NOTE: Refer to the Owner’s Manual for an explanation of the hole settings.
If you are unsure, use Setting C to start.
Unlocked
Locked
FIGURE 10
C
B
A
1
2
3
FIGURE 9
FIGURE 8
FIGURE 7
2
Bracket Pin
Pivot Pin
1
3
Cam Lock