BEFORE STARTING
to assemble your Over EZ
TM
Training Handles,
remove all of the individual parts from the carton. You should
have the following items:
ITEMS FOR ASSEMBLY ITEM #’s
Double-ended
Threaded Bolts (6)
F5-1128
Locking Nuts (6)
H1-3013
Left Handle
F5-1117
Right Handle
F5-1116
Over EZ
TM
Training Handles
H1-3013
F5-1128
Note: The Double-ended Threaded Bolts
and Locking Nuts arrive pre-assembled on
the handles.
The Over EZ
TM
Training Handles are an optional accessory to be used with Teeter Hang Ups
®
F-series Inversion Tables and are
designed to assist novice inverters much like training wheels for a bicycle! Once you are comfortable using the inversion table
(
for proper balancing instructions, please refer to the Owner’s Manual attached to your inversion table)
, you can choose to use
either the Over EZ
TM
Training Handles or convert back to the standard handles that come with the F-series Inversion Tables.
Figure 1
2)
Remove the three inside Locking Nuts (H1-3013) from the
Double-ended Threaded Bolts (F5-1128) on the Right
Handle (F5-1116).
3)
Line up the Right Handle with the hinge plate on the
right side of the A-frame, inserting the Double-ended
Threaded Bolts into the corresponding holes in the hinge
plate.
See Figure 2.
4)
Secure the handle with the three Locking Nuts, tightening
the Locking Nuts with a 10 mm wrench or pliers.
See
Figure 2A for proper assembly.
5)
Repeat Steps 2-4 with the Left Handle.
6)
Figure 3
shows the finished assembly.
Figure 3
ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
ASSEMBLY
Front of
A-frame
Right
Left
Figure 2
Hinge plate
Rear of
A-frame
Figure 2A
For information about the Teeter Hang Ups
®
5-year warranty, or if you have any
problems assembling the equipment or questions about its use, please contact
Customer Service at the appropriate location below:
Teeter Hang Ups
®
is a registered trademark of STL International, Inc., Inversion
International, Ltd. and Teeter Ltd.
© COPYRIGHT 2006, Inversion International, Ltd. and Teeter Ltd.
International Law Prohibits Any Copying II-L578 11/06-3
F5-1117
(Left)
F5-1116
(Right)
To assemble the Over EZ
TM
Training Handles:
1)
First remove the standard hand grips from the A-frame (if they are already assembled).
See Figure 1.
International:
Inversion International, Ltd.
PO Box: AP 59245
New Providence Island, Bahamas
(Phone) +1-242-362-1001
(Fax) +1-242-362-1002
www.InversionInternational.com
Europe:
Teeter Ltd.
Cygnet House, Sydenham Road
Croydon, Surrey CR0 2EE
United Kingdom
(Phone) +44-(0)20-8667-0060
(Fax) +44-(0)20-8680-3999
www.TeeterLtd.com
USA & Canada:
STL International, Inc.
9902 162
nd
St. Ct. E.
Puyallup, WA 98375
(Phone) 800-847-0143
(Fax) 800-847-0188
www.STLIntl.com
