Teesa TSA8028-2, Руководство пользователя

Страница: 13 / 36

Owner’s manual 13
EN
OPERATION
cautious manner, and all the safety precautions are understood and followed. Children
should not play with this device. Children should not perform cleaning and servicing of
the device unsupervised.
• Pay attention! The surface of this device may get hot; the air outlet gets hot during
operation. Closely supervise any children and pets when in use.
• Do not route power cord underneath the heater or in front of air inlet or outlet.
• Do not insert anything into the ventilation grill!
• ALWAYS disconnect the product form the mains supply when it is not in use.
• DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.
• Do not attempt to repair this appliance yourself. Only authorized and qualified personnel
may repair this device. Never disassemble this device.
• Fixed power cable may only be replaced in an authorized service point.
• Appliance for indoor and household use only.
• Clean this device in accordance to instructions listed in “Cleaning and Maintenance”
section. Keep the fan heater clean. Do not allow any objects to enter any ventilation or
exhaust opening as this may cause electric shock, or fire or damage to the heater.
1. Make sure the device is turned off (0) and the thermostat knob is set at the minimal
value, before plugging it into power mains socket.
2. Use the mode selection knob to choose desired work mode:
• Turn the mode selection knob to position, the heater blows cool air.
• Turn the mode selection knob to “I” position, the heater blows warm air, working at
1000 W.
• Turn the mode selection knob to “II” position, the heater blows hot air, working at
2000 W.
• Turn the mode selection knob to “0” position, the heater stops working, the indicator
light will be off.
3. Use the thermostat switch to select desired temperature setting.
4. The operating temperature is selected by a combination of the power mode knob and
thermostat settings. The hottest setting will be when the heater is at the second heating
setting (II) and thermostat is turned to maximum.
Note: When in heating modes, the indicator light will be on signalizing the device has
not reached the set temperature yet.
5. Automatic temperature control: When the room has reached the required temperature
turn the right thermostat knob in an anti-clockwise direction up to the point where
the appliance switches off and not beyond. The temperature fixed in this way will be
automatically regulated and kept at a constant level by the thermostat.
0
I
II
Note : Knobs on your device may differ in
appearance from the once presented in
this instruction manual. Illustrations are
for reference only.