Owner’s manual
13
EN
OPERATION
Plug the device to power mains before operating it.
1. Modes:
• Manual mode:
adjust the speed knob to start
mixing. Turn it back to “0” to stop. Control the
mixing time according.
• Turbo:
marked as T, push and hold to use this
mode.
2. Speed control:
• 0: Off
• T: turbo
• Adjust the speed rotating the speed control
button clockwise (from 0 to MAX, the closer to
MAX, the higher the speed).
Note
: The device will stop working if it was interrupted during operation (e.g. top cover
opened). Rotate the speed control button to “0” position, then restart.
KNEADING/BEATING/WHISKING
Depending on the consistency of the ingredients, the bowl with its cover can be used to
prepare up to 1,5 kg of dough.
1. Before using for the first time, clean all parts of the accessories with soapy water, rinse and dry.
2. Press button to the release the multifunction head.
3. Fit the bowl onto the appliance by turning until it locks in position and place the
ingredients in it.
4. Position the cover on the bowl with the filling opening at the front of the appliance.
1. Whisk
2. Beater
3. Dough hook
4. Screw ring
5. Cutter housing
6. Pusher
7. Opener
8. Worm shaft
9. Tray
10. Coarse grinding disc
11. Medium grinding disc
12. Fine grinding disc
13. Cutter blade
MAX
1 2
3
4
5
6
7
8
1 2
3
4
5
6
7
8
