Teesa TSA3011, Руководство пользователя, Страница: 22 / 56

Owner’s manual 22
EN
prevent juice from dripping out.
NOTE : ensure that the anti-drip spout is open during juicing, so that the juice does not collect
in the juice container.
• To close the anti-drip spout, gently press the spout upwards.
• To open the anti-drip spout, gently press the spout downwards.
DISSASEMBLY
1. Close the anti-drip spout if necessary.
2. Turn the fruit press clockwise by approx. a quarter turn, remove it from the pressing
handle and place it on the juicer cone.
3. Remove all accessories together from the motor unit, by lifting the juice container
upwards - without dripping, you are able to transport all accessories to the sink where
you disassemble and clean them.
CLEANING AND MAINTENANCE
• Clean all the parts that will come in the contact with food prior to first use of the device!
• Disconnect from the power supply socket before disassembling and cleaning.
• The motor unit, the power cable and the mains plug must not be immersed in water or
any other liquid.
• NOTE: clean the device as soon as possible after each use, so that the pulp does not dry
onto the surfaces.
• Removing pulp and pips: before starting the washing-up or putting the accessories in the
dishwasher, remove pips and pulp.
• Do not use any sharp or abrasive cleaning agents.
• The following parts can be cleaned in the dishwasher or by hand: cone, filter, juice
container.
• Parts that cannot be cleaned in a dishwasher should be wiped with soft, slightly damp