EN
Owner’s manual
9
Cord clamp
winding the cord and the hose around the unit base, push the clamp back.
If the descaling indicator illuminates, it indicates
collected to a degree it should be replaced:
1.
power supply.
2. Grasp the water tank (press the release button
under the tank’s handle at the front of the device)
and pull to detach the tank.
3.
4.
be immersed beforehand into the water for more
than one minute.
5. Place the tank in its original place, connect
the device to power supply and turn it back to
in correct position, if not, the descaling indicator
will keep blinking.
IMPORTANT:
Do not operate this device with an
and the steam function could fail altogether. If the tap water you use is hard water, using
1. Remove any sticker, protective foil or storage cover from the soleplate if present.
2.
one minute.
3. Connect to power supply and turn the device on. Heat up the iron to maximum temperature
and iron over a piece of damp cloth for several minutes for the purpose of removing any
residue on the soleplate.
NOTE:
•
short while.
•
normal; the particles are harmless and stop coming out of the iron after a short while.
• When you switch on the appliance, the steam generator may produce a pumping sound. This
is normal phenomenon.
• During the heating process of the soleplate, there will be little steam coming out from the
soleplate automatically and this phenomenon will continue for about 3 seconds. This is normal
phenomenon.
BEFORE FIRST USE
Содержание TSA2030
Страница 1: ...Σίδερο Ατμού TSA2030 EN Owner s manual GR Εγχειρίδιο χρήσης ...
Страница 2: ......
Страница 3: ...3 4 3 6 5 7 12 8 2 1 9 13 14 11 10 ...
