EN
Owner’s manual
22
1. Remove the lid from the milk container.
2. Make sure the frothing whisk is removed from the stirrer
whisk.
3. Attach the whisk to the spindle on the bottom of the milk
container and make sure it can rotate freely.
4. Fill the container with milk at least to the MIN level and do
not exceed MAX level.
5. Place the lid on the milk container.
6. Press:
•
to stir and heat milk.
•
to stir milk without heating.
7. When stirring and heating milk,
button lights red
during whole process. When the temperature of about
65°C is reached, the appliance switches off automatically
and the button goes off. The process lasts for about 2
minutes.
Note:
After a heating cycle the appliance cannot start a
new heating cycle immediately, but must be allowed to
cool down first. After a cold-frothing cycle a new one may
start immediately.
8. When cold-stirring milk,
button lights blue during
whole process. The stirring process lasts about 2 minutes.
After this time, the appliance switches off automatically
and the button goes off.
Note:
Stop the stirring manually with a press of the
or
button at any time.
9. Remove the lid from the milk container.
10. Grab the appliance by the heat-resistant handle, lift it off
the base and pour out milk.
CAUTION! Danger of scalding!
Only hold the milk
container by its handle. Do not touch any other part as it
may be hot.
11. Clean the appliance according to the instructions in
Cleaning section.
STIRRING