User Guide - 2.11 Tracks
Teenage Engineering
– User Guide (LD)
Janvier 2019
33/59
2.11.6 FX
The two fx tracks are where you select
your send effects.
You can assign a different effect to any
one of the two fx tracks
Check the reference page to see all
available fx engines and parameters
To select an effect: while on fx1/fx2 hold TRACK and
press one of the black keys. Turn the “color dials”1-4
to control fx parameters p1, p2, Filter and filter
resonance.
pro-tip: holding
SHIFT
while on an fx track enables you to play the previously selected drum /
synth track so that you can hear what that track sounds like with different fx settings.
2.11.7 Tape
The tape track is an audio buffer that is constantly recording when in playback. It can be used
for tape tricks and beat repeat style looping effects.
Read more about it here § 2.13 au-dessous.
2.11.8 Master
The
“master track” allows you to transpose selected tracks and add harmonic chord
progressions.
Like other control tracks the master track can be sequenced allowing you to record interesting
key changes and harmonic chord progressions.
Read more about it here § 2.14 au-dessous.
2.11.9 Performance
The performance track allows you to apply punch-in effects on all tracks at once.
Hold
TRACK
and press
PERFORM
to select the performance track.
Hold the
piano keys
to add punch-in effects.
You can record, copy and delete punch-in effects in the same way you would work with notes
on a drum/synth track.
Read more about
“punch-in effects” here § 2.16 au-dessous.
