User Guide - 2.13 Tape
Teenage Engineering
– User Guide (LD)
Janvier 2019
36/59
2.13 Tape
Tape introduction
The tape track is an audio buffer that is constantly recording when in playback. It can be used
for tape tricks and beat repeat style looping effects.
Tape parameters
speed coarse
Set the speed of the
buffer playback. Left
plays back at regular
speed. scrolling right
increases the speed and
then once again
decreases to a full stop
speed fine
The center position (led
green) will play the
buffer at normal speed.
Rotating left will play at
half speed and rotating
right will play at double
speed
filter
Control the filter of the
tape effect
resonance
Control the resonance
on the tape filter
Pro-tip: sending midi cc simultaneously to parameters 1 and 2 can result in some cool
scratching effects.
Tape controls
The white keys are used
to choose from which part
of the buffer playback
begins
The black keys choose the length of the tape loop with 1 being the shortest
and 0 being the longest
