User Guide - 2.7 Project
Teenage Engineering
– User Guide (LD)
Janvier 2019
23/59
2.7 Project
2.7.1 Project introduction
Project is the first of the four index buttons, on the top side of OP-Z. This is where you select
the project and pattern that you wish to work on.
Each of the 10 projects holds 16 pattern.
Switch patterns instantly or create patterns chains to make longer compositions. You can also
perform operations such as copying patterns and settings and more.
2.7.2 Select project
Press and hold
PROJECT
and press the
“value keys”
1-0
to select a project.
Pro-tip: while playing, press
PLAY
before selecting a new project to delay the switch until the
end of the current bar
2.7.3 Select pattern
Press and hold
PROJECT
and press the pattern keys 1-16 to select a pattern.
If the sequencer is playing, the patterns switches instantly, maintaining the current step
position for all tracks.
2.7.4 Chain patterns
Press and hold PROJECT and press PLAY to
enter chain mode. Keep holding PROJECT and
select up to 32 patterns to create a pattern
chain or song sequence
Active pattern chains can be saved by holding
PROJECT together with a white piano key
