Packing list:
▶
TMCT-07 Barcode Scanner
▶
USB Cable * 1PC
▶
Quick Start Guide
▶
Inventory mode setup card
▶
Power Adapter * 1PC
▶
USB wired + 2.4G
▶
Built-in FLASH memory, supports breakpoint resume
▶
Can store 2600 pieces of Code-128 codes under offline state
▶
Supports Windows XP/7/8/CE, Mobile OS
Email: [email protected]
Website: www.teemistore.com
T M C T -0 7
www
.
teemistore
.
com
Q u i c k S t a r t G u i d e
TMCT-07 Barcode Scanner Overview
Performance Characteristics:
Appearance:
Power
USB Port
2.4G wireless mode
USB Wired mode
Functions Setup:
TMCT-07 Barcode Scanner can setup all
default functions through reading the setup
barcodes.
Enter Setup
Read function barcode
Exit with Save
Light source
Decode Capability
Resolution
Nominal Working Distance
Decode Rate
Scan width
Decode mode
Scan mode
Print Contrast Minimum
Scan angles
Cylinder Horizontal Scan
Indication
Radio Range
Interfaces Supported
Processor
EEPROM
Wireless Communication
Battery
Laser LED 650+/-20nm
3mil
6~30cm
100 decodes per second
30mm
Single-Line Aiming
Auto off mode / Manual mode
30%
Roll 30° Pitch 75° Yaw65°
Diameter 35mm
Beeper, LED
10m Visual range
USB2.0
ARM 7 72MHz
256K, can store thousands of barcodes
1500mAh lithium battery
Code bar, Code 11, Code 93, MSI, Code 128,
UCC/EAN-128, Code 39, EAN-8, EAN-13,
UPC-A, ISBN, Industrial 25, Interleaved 25,
Standard 25, 2/5 Matrix
2.4G wireless transmission
TMCT-07 integrates high-performance processor and decoding board, it has fast decoding, high-precision reading ability, and high anti-interference ability. It can easily
read barcodes on paper, goods and other media. The DOF is a great improvement compared with similar products. It also boosts high scanning speed and powerful
reading ability with high accuracy.
Deep sleep technology no need to start up, it will scan as you press the button.
TMCT-07)
LED Indicators
Beeper
Beeping
Meaning
One long beep, high tone
One short beep, high tone
One long beep, low tone
Two short beeps, high tone
Three short beeps, tone descending
from high to low
Three short beeps, tone ascending
from low to high
Power on
Read barcode, with green LED on (1s) and off quickly
Configuration error, with purple flashing; Or transmit buffer
full, with green LED on and off quickly
Power off
Enter or Exit Setting mode, with purple LED flashing
Configuration correct, with purple LED flashing;
Indicator Colour
Meaning
Blue LED on (1s) and off quickly
Yellow, Flashing (On/Off ratio 1:1)
Good Read, with one short beep (high tone)
Indicates the TMCT-07 Scanner in Setting mode
The red light is charging indicator
The red indicator will light during charging, and off when full
charged
When you press the SCAN button, if the scanner has two short beeps (high tone) and stop scanning,
it means the battery is dying.