USER GUIDE
TEEJET TECHNOLOGIES
98-01569-EN-R1_A4LT-RXA52-UG.docx
3
Mounting Plate Instructions
The RXA-52 is equipped with two
(
2) built-in magnets for attaching to the included mounting bracket. If a permanent mount for the
RXA-52 is required, please contact TeeJet Technologies Technical Support for more information.
Intermediate Mounting Plate Template
A template for the intermediate mounting plate has been provided below.
•
Red circles indicate holes where attachment will occur.
•
Green lines indicate the outline of the mount and other holes for attaching the release plate.
WARNING! The optimal screw penetration into the mounting holes is 0.25 inch / 6 mm (±
1
/
32
inch / 1 mm) deep. When selecting
screws for mounting, ensure the screw penetration does not exceed this specification. Using excessively long screws can
damage the antenna enclosure.
Antenna Care
•
The RXA-52 is designed to withstand the elements, including rain, snow, and dust.
•
However, to ensure your antenna performs optimal
ly, keep the radome (the top surf
ace of the antenna) clean and brush off any ice
and snow.
6.25 in
ch
158.75 mm
5.0 inch
127.0 mm
0.50 inch × 4
12.7 mm × 4
0.50 inch × 4
12.7 mm × 4
Ø0.27 inch ± 0.01 inch drill thru × 4
Ø6.858 mm ± 0.01 mm drill thru × 4
This side will route
toward back of vehicle
