TeeJet Technologies AEROS 9040 Скачать руководство пользователя страница 65

Страница: 65 / 126

98-05304-EN R2

Aeros 9040 field computer

HOME

TUP

GUID

ANCE

FULL SCREEN

INTR

ODUC

TION

GNSS

TE C

ONTR

APPENDIX

IMPLEMENT

APPLICATION OR WORKING WIDTH

Application width [Straight implement type or Staggered implement type] or Working width [Spreader implement type] is used to enter the

width of the single section or width of each section to calculate the total width of the implement.

Single section

No section control is available on the system.
Application width or Working width is used to enter the total width of

the single section of the implement. Range is 1.0 to 75.0 metres.
1. Press CONFIGURATION side tab

2. Press

Implement

3. Press the Application width [Straight implement type] or Working

width [Spreader implement type] KEYPAD icon

4. Use the numeric keypad to enter a value.
5. Press RETURN arrow

or CONFIGURATION side tab

return to the main Configuration screen.

Figure 6-27: Single section – Application or Working width

Multiple sections

Section control is available when any of the following are on the

system: SmartCable, Section driver module (SDM), Switch function

module (SFM) or compatible ISOBUS Implement ECU.
Application width or Working width is used to enter the width of each

section to calculate the total width of all sections of the implement.

Each section can be a different width. Sections are numbered from

left to right while facing in the machine's forward direction. Range

for each section is 0.0 to 75.0 metres. Total for all sections must be

greater than 1.0 metre.
1. Press CONFIGURATION side tab

2. Press

Implement

3. Press the Application width [Straight implement type or

Staggered implement type] or Working width [Spreader

implement type] KEYPAD icon

4. Highlight the section to be entered or edited.
5. Press the KEYPAD icon

6. Use the numeric keypad to enter the width of the selected

section.

7. Press RETURN arrow

or CONFIGURATION side tab

return to the Implement screen or main Configuration screen.

NOTE: If Symmetric implement layout is enabled, only the first

of each pair of aligned sections will be available to be

highlighted.

Figure 6-28: Multiple sections

–

Application or Working width

Содержание AEROS 9040































































































































Результаты поиска

Содержание AEROS 9040

Отзывы:

Похожие инструкции для AEROS 9040

Бренды по названию

Популярные бренды

TeeJet Technologies AEROS 9040, Руководство пользователя

Результаты поиска

Содержание AEROS 9040

Отзывы:

Похожие инструкции для AEROS 9040

Бренды по названию

Популярные бренды