page 28 | tedee keypad
www.tedee.com
failure melody
(2 long tones)
no signal
1 short beep
no signal
1 short tone
no signal
no signal
no signal
Occurs when the PIN number is
entered incorrectly.
Signalizes an attempt to
establish connection with lock
(only when entering PIN).
Occurs when the „C” button
is pressed.(only if any digits
were previously entered)
Your batteries require
replacement.
Signalizes connection timeout/
failure or pairing error.
Occurs when any button is
pressed while keypad is blocked
by too many PIN errors.
Occurs when the “C” and
buttons are released
while triggering factory reset
procedure.
Please contact tedee support
team.
constant light
for 2 seconds (LED)
pulsating light (LED)
keyboard illumination
fadeout
3 short flashes (LED)
repeated every 5
seconds
3 short flashes (LED)
3 short flashes (LED)
3 short flashes (LED)
various combinations
of short and long LED
light signals
Red
Green
-
Red
Red
Red
Red
Red
PIN
incorrect
Attempt of
connection
PIN cleared
Low battery
Error
Keypad
blocked
Factory reset
confirmed
Hardware
error
