Tecway Mecpower POLI GO AROUND, Руководство пользователя

Страница: 11 / 25

10
Attention：Machine has to be placed on flat ground.
5.2 How to fix
5.3 Check connection before power input
1)
Check the internal structure of the machine for any looseness caused by
transportation . The wire connector terminals should not fall out of the port.
2)
Check the ground wire is connected to the ground.
3)
Check the machine's power input at both ends of the impedance to the ground
should be greater than 100 megohm.
4)
Adjust coin mech to make tokens work properly.
5) Load the card and adjust the card equipment until it can work
properly.
6)
Connect the power cord.
Foundation
Wheel
5
m
m
市电插盒
电源输入插头