Tecumseh OV490EA Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 24

Tecumseh OV490EA Скачать руководство пользователя страница 18

Page 16

Four-Cycle Engine • Vertical Crankshaft • Air-Cooled

181-887-14

XI. Maintenance Intervals

Maintenance is one of the most important things that you
can do to extend the life of your Tecumseh Engine. If you
are unable to perform maintenance intervals yourself,
contact your nearest Authorized Tecumseh Servicing
Dealer. You may also call Tecumseh Power Company at
1-800-558-5402 or visit www.TecumsehPower.com to
locate your dealer.

ALWAYS promptly follow maintenance intervals listed. See
Table 5.

First Scheduled Maintenance

After First 2 Hours When Engine is Warm

1. Change Oil

Date_______________Owner/Dealer

Before Each Use Scheduled Maintenance

Every 5 Hours or Before Each Use

1. Check Oil Level
2. Clean Cooling Fins

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Every 25 Hours or 3 Months Scheduled Maintenance

1. Clean Foam Pre-Filter

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Date_______________Owner/Dealer

Table 5. Maintenance Intervals

Procedure

Time

Change
Oil

After first 2 hrs.

when engine is warm

Check
Oil Level

5 hrs. or Before Each Use

Clean
Cooling Fins

5 hrs. or Before Each Use

Change
Oil

50 hrs. or 3 mos.

Clean
Foam Pre-Filter

25 hrs. or 3 mos.

Replace
Paper and Oil Filter

100 hrs. or

seasonally

Check
Spark Plug

100 hrs. or

seasonally

Replace
Spark Plug

200 hrs. or

seasonally

«
...
16
17
18
19
20
...
»

Содержание OV490EA

























Отзывы:

Нет отзывов