![Tecumseh OH195 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/tecumseh/oh195/oh195_operators-manual_1073163007.webp)
181-1032-14
Page 5
B. Filling Oil Sump
I.
Oil Fill Cap or Oil Fill Plug with Dipstick
If your engine has an oil fill cap go to step 1. If your engine
has an oil fill plug, see "II. Oil Fill Cap Without Dipstick (Oil
Fill Plug)" instructions below.
1.
Be sure engine is upright and level.
2.
Unscrew oil fill cap from oil filler tube and wipe dipstick
clean. See Figure 8 on page 4. Afterward, continue
reading instructions below.
NOTE
Some engine models feature an oil fill plug with an attached
dipstick. See Figure 9.
3.
Screw oil fill cap or oil fill plug back into oil filler tube.
Tighten securely.
4.
Unscrew and remove oil fill cap or oil fill plug from oil
filler tube. Note oil level. If oil reading on dipstick is
below “ADD” mark, slowly add oil to reach “FULL” level.
See Figure 7 on page 4. Afterward, continue reading
instructions below.
5.
Screw oil fill cap or oil fill plug back into oil filler tube.
Tighten securely.
6.
Wipe away any spilled oil.
II. Oil Fill Cap Without Dipstick (Oil Fill Plug)
If your engine has an oil fill plug go to step 1. If your engine
has an oil fill cap, see "I. Oil Fill Cap or Oil Fill Plug with
Dipstick" instructions above.
1.
Be sure engine is upright and level.
2.
Clean area around oil fill plug. See Figure 9.
3.
Unscrew oil fill plug.
4.
Add oil to overflow point, making sure to avoid spilling.
5.
Screw oil fill plug back into oil fill hole. Tighten securely.
6.
Wipe away any spilled oil.
C. Filling Fuel Tank
An adult should fuel this engine.
NEVER allow children to refuel this
engine. Gasoline (fuel) vapors are highly flammable and
can explode. Fuel vapors can spread and be ignited by a
spark or flame many feet away from engine. To prevent
injury or death from fuel fires, follow these instructions:
1.
Stop engine and allow it to cool before refueling.
2.
Be sure engine is outdoors and in a well-ventilated
area.
3.
Clean area around fuel fill cap and remove fuel fill cap.
See Figure 8 on page 4. Afterward, continue reading
instructions below.
NOTES
For recommended fuel, see Table 2 and “III. Oil and Fuel
Specifications” instructions on page 4. Afterward, continue
reading instructions.
WARNING
4.
Using an approved red GASOLINE container, add fuel
slowly, being careful to avoid spilling. DO NOT overfill
fuel tank. Leave space in the tank to allow fuel to
expand without overflowing.
5.
Replace fuel fill cap securely and wipe up spilled fuel
before starting engine. If fuel is spilled DO NOT start
engine. Move machine away from area of spillage.
Avoid creating any source of ignition until fuel vapors
are gone.
NOTE
Replace a damaged or missing fuel fill cap only with a
genuine TecumsehPower replacement Fuel Fill Cap. Failure
to do so may
VOID YOUR WARRANTY.
See Figure 10.
6.
Be sure fuel valve, if present (see equipment manufac-
turer’s instructions) is open. See Figure 13 on page 6.
Figure 9. Other Possible Oil Fill Locations
Figure 10. Possible Fuel Fill Cap(s)
1. Oil Fill Plug With Dipstick
2. Oil Fill Plug
2
2
1
Front View
Bottom View
Содержание OH195
Страница 20: ...Page 18 181 1032 14 ...
Страница 21: ...181 1032 14 Page 19 NOTES ...