181-1275-14
4-Cycle • Snow King Engine
Page 5
B. Filling Oil Sump
I.
Oil Fill Cap/Dipstick
If your engine has an oil fill cap/dipstick go to step 1. If your
engine does NOT have an oil fill cap/dipstick, see "II. Oil Fill
Cap/Plug" instructions below.
1.
Be sure engine is upright and level.
2.
Unscrew oil fill cap/dipstick from oil filler tube and wipe
dipstick clean. See Figures 8 and 9.
3.
Screw oil fill cap/dipstick back into oil filler tube. Tighten
securely.
4.
Unscrew and remove oil fill cap/dipstick from oil filler
tube. Note oil level. If oil reading on dipstick is below
“ADD” mark, slowly add oil to reach “FULL” level. See
Figure 7 on page 4. Afterward, continue reading
instructions below.
5.
Screw oil fill cap/dipstick back into oil filler tube.
Tighten securely.
6.
Wipe away any spilled oil.
NOTE
To change oil for engines with an oil fill cap/dipstick, see
"B. Changing Oil" instructions on page 17.
II. Oil Fill Cap/Plug
If your engine does NOT have an oil fill cap/dipstick, go to
step 1. If your engine has an oil fill cap/dipstick, see "I. Oil
Fill Cap/Dipstick" instructions above.
1.
Be sure engine is upright and level.
2.
Clean area around oil fill cap/plug. See Figure 9.
3.
Unscrew oil fill cap/plug.
4.
Add oil to overflow point, making sure to avoid spilling.
5.
Screw oil fill cap/plug back into oil fill hole.
Tighten securely.
6.
Wipe away any spilled oil.
NOTE
To change oil for engines with an oil fill cap/plug, see
"B. Changing Oil" instructions on page 17.
Figure 8. Oil Fill Cap/Dipstick Locations
Figure 9. Oil Fill/Drain Locations
OH318SA/OH358SA
OH195SA/OH195SP
LH318SA/LH358SA
LH195SA/LH195SP
STO
P
STOP
1. Oil Fill Cap/Dipstick
2. Oil Fill Cap/Plug
3. Oil Drain Plug
1
3
2
3
Back View
2
3
3
Angled Front View
