Tecsun S-8800, Руководство по эксплуатации

Страница: 25 / 40

22
16 LISTENING TO STORED STATIONS
Turn on the radio, select your desired FM/LW/MW/SW band and press the [VF/VM]
button or to enter the View Memory [VM] mode. When in VM mode, the memory
location “PXXX” is displayed in the upper right corner of the LCD. Browse all stored
stations through any of the below methods.
METHOD 1: Manually browsing stored stations
In VM mode, rotate the [TUNING] knob
on the radio or press the [ ] or [ ]
button on the remote control to select
your desired stored station.
Browse stored stations
METHOD 2: Auto browsing stored stations
In VM mode, press and hold the [VF/VM] button on the radio or [SCAN]
on the remote control. The Auto Browsing function is activated, indicated by
the “Preset” symbol blinking in the upper right corner of the LCD. The device will
play each stored station for about 5 seconds. To stop browsing, rotate the [TUNING]
knob on the radio or press any key on the remote control. button
Note: The auto browsing direction is based on the last used manual browsing
direction. When the last used manual browsing direction was up frequency / down
frequency, then the auto browsing direction is also up frequency / down frequency.
METHOD 3: Direct key in station memory location
In VM mode, use the numeric keys on the remote control to directly key in the
station memory location. For example, press [0], [2], [3] when the station memory
location is “P023”.
Note:
If the entered station memory location is not in use, the LCD displays “- - - -” .