6 WORKING WITH MEMORY
At the factory, the PL-450 is set up with
page.
3. Press/release the PAGE button to
10 pages of memory (from 01~10), each
finalize the page change.
page holding 50 frequencies plus 100
frequency memory in P0. This enables
ACCESSING WHAT IS STORED INTO
storing of 600 frequencies into memory.
MEMORY
Memory setting of 01~10 can be changed
There are three ways to access what has
and tailored to your personal needs or
been stored into memory: Direct Memory
can be left as is. When first learning to
Access, Manual Memory Search and
store stations into memory, we suggest
Memory Auto-scan. These three methods
using the factory setting. To change the
are described below. When the memory
factory setting, see the section
page and memory preset numbers
CUSTOMIZING MEMORY PAGES. When
appear in the upper right corner of the
working with memory, the term PRESET
display, as it will in the descriptions below,
appears in the display under the memory
the radio is in MEMORY ACCESS MODE.
numbers.
This mode can be exited any time with a
press/release of the FREQ/PRESET
STORING STATIONS INTO MEMORY
button (8).
1. Turn on the radio.
2. Tune to the desired station.
If you first need to change memory
3. Press/release the MEMORY button
pages, see the previous section,
(15). Note that the memory number
SELECTING/CHANGING MEMORY
digits, labeled PRESET (43) flash in
the upper right corner of the display.
PAGES.
The memory page number, labeled
DIRECT MEMORY ACCESS
PAGE, also appears, but does not
Use the numeric keypad to key-in the
flash.
4. Within 5 seconds use the numeric
memory number. For example, if the
keypad to enter the memory number
desired radio station is in memory
that you wish to store the station into.
number 01, just press '0', then '1', and it
For memories 1-9, enter the numbers
will go to memory 01.
as 01~09.
5. Within 5 seconds press the MEMORY
MANUAL MEMORY SEARCH
button(15), or wait 5 seconds. This
Manual Memory Search enables manual
finalizes storing into memory and after
searching through the memories within a
a few seconds, the upper right corner's
memory page, as shown below:
display returns to show the clock.
1. Press/release the FREQ/PRESET (8)
SELECTING/CHANGING MEMORY
button.
PAGES
2. Use quick, short presses on the UP or
To select/change memory pages:
DOWN buttons or use the tuning knob
1. Press/release the PAGE button (9).
to search through the memories.
The page number flashes in the
3. Press the FREQ/PRESET button (8)
display.
when finished.
2. Within 3 seconds, use either the UP or
DOWN button to change to the page of
your choice. Alternately, use the
numeric keypad to enter the page or
use the tuning knob to change the
PL-450
OWNER'S MANUAL
