Ph: +61 2 9939 4377
www.tecsunradios.com.au
Ph: +61 2 9939 4377
www.tecsunradios.com.au
TECSUN RADIOS AUSTRALIA
24/9 Powells Road, Brookvale, NSW 2100 Australia
Ph: +61 2 9939 4377
Email: [email protected]
www.tecsunradios.com.au
SLEEP FUNCTION
11
Delete all memories
Method 2:
SEMI AUTO-DELETE MEMORY
Press the [VF/VM] button to enter the memory mode,
then press & hold the [VF/VM] button to activate the
memory auto-browse function. During the browsing
process unwanted stations can be deleted by pressing
the [DEL.] button. Press the [VF/VM] button again to
stop browsing.
SLEEP
10
Method 2:
MANUALLY STORING STATION
1. Tune to your desired station, press the [MEM.] button
once and notice the PRESET number flashing in the
upper right corner of the display.
2. The station is automatically stored after 3 seconds;
press the [MEM.] button to confirm immediately. If you
prefer to store the station at a different memory position,
rotate the [TUNING] knob to the position of your choice
and press the [MEM.] button to confirm.
Method 3:
SEMI-AUTO STATION STORAGE
1. Short press the [VF/VM] button to enter frequency
mode.
2. Long press [VF/VM] button to activate the Auto-browse
function.
3.
During the browsing process, press the [MEM.]
button to store stations into the next available
memory position. The browsing process continues
until you press the [VF/VM] again.
DELETE MEMORY
Method 1:
DELETE SINGLE MEMORY MANUALLY
1. Turn the radio on and press the [VF/VM] button until
"Preset" and the memory position appears in the upper
right corner of the display.
2. Rotate the [TUNING] knob to select the stored station
you wish to delete.
3. Press & hold the [DEL.] button until " " flashes on
the display, press again to confirm.
Note:
If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
1. In POWER OFF mode, press &
hold the [POWER] button untill
the sleep timer symbol “ ”
flashes on the display.
2. Rotate the [TUNING] knob
immediately to select a sleep
timer from 1 - 120 minutes or
select “ ” for POWER ON
mode (the radio will be turned
on after 1 second).
Note:
The default setting of the sleep timer is “ ”.
SLEEP
Sleep time range
SLEEP
flashing
flashing
DELETE ALL MEMORY
Press the [VF/VM] button to
enter the memory mode, then
press & hold the [DEL.] button
until " " appears on the
display, press the [DEL.] button
again to confirm.
Note:
If the [DEL.] button is not pressed within 2 seconds
to confirm, the delete function is automatically exited.
Method 3:
