www.tecsunradios.com.au
LITHIUM BATTERY POWER SUPPLY
Please use the lithium battery approved by Degen
to power this product. A lithium battery is included
with this product. Do not use of any un-qualified
battery that may cause problems or dangers such
as inflammation or explosion.
INSTALLING THE BATTERY
1. T urn off the radio and open the battery cover.
2. Install the provided lithium battery according
to the battery polarity.
3. Close the battery cover.
1. Full
4. Exhausted
2. Medium
3. Low
BATTERY CONSUMPTION INDICATOR
CHARGING THE LITHIUM BATTERY
External Adapter (not included)
Please use a
matched adapter (
5V DC/500mA
,
USB port) to charge the radio
.
1. Install the lithium battery.
LITHIUM BATTERY POWER SUPPLY
2. To charge the battery, connect the Micro-USB
cable to the radio, the other end to a USB
adapter.
3. While charging, the battery symbol shown on
the display moves from right to left, and
stops when the battery is fully charged. Then
disconnect the radio and the adapter.
NOTE:
When charging, press < > to turn on/off the
radio. Battery charge
r
s can interfere with the radio
signal, so it is not recommended to use the radio
when charging. Do not use a charger or computer
to power the radio to play music or listen to the
radio when the battery is unloaded. Please remove
the battery or fully charge it once in 2 months if the
radio is not used for a long time.
Charging using a PC
1.
Connect the radio and the computer with the
provided USB cable.
2. While charging, the battery symbol shown on
the display moves from right to left.
3. T he battery symbol stops moving when the
battery is full charged.
NOTE:
When charged by PC, a USB symbol shown
on the radio’s display. When Micro SD/TF card or
USB drive is inserted, press < > twice and
select Music Mode to play the music.
LITHIUM BATTERY POWER SUPPLY
3
