Tecsis F3203, Руководство по эксплуатации, Страница: 13 / 44

13 WIKA operating instructions, model F3203
EN
79101736.01 08/2021 EN/DE


F

F
5.3 Mounting
5. Commissioning, operation
Lay the bending beam

onto the mounting surface

. It must only rest up to the edge

. Ensure there is play (minimum 0.5 mm) between the plate and the edge. With M6
screws (property class 8.8) a tightening torque of 10 Nm is recommended. For safety-
relevant applications or if the application is subject to official regulations, the calculati-
ons corresponding to that standard must be carried out.
Screw the bending beam

together with the mounting surface

. Load the bending
beam in tension or compression, depending on the calibration. The direction of force can
be read from the arrow on the product label.