Tecsis EZE30, Руководство по эксплуатации, программированию и обслуживанию

Страница: 14 / 52

ANALOGUE OUTPUT SETTINGS - See Page 16
FILTER SETTINGS & NO MOTION
0
T 1
SELECT THE TYPE OF LOW PASS FILTER REQUIRED. (TYPE Fir [Mode 1] or IIr [Mode 0])
Use the UP/DOWN keys to select the type of filter used. Type IIR should be used where heavy damping is
required. Type FIR should be used where high speed is required. Default setting IIR. See Filter Level (FL)
versus Cut off Frequency tables on the next page.
0
T 1
T
T
T
2
0
T 1
0
T 1
T
T
T
2
SET THE STABILISATION TIME. (RANGE 0 - 65535)
Use the UP/DOWN & MOVE RIGHT keys to set the time in milliseconds within which
the weight value displayed has to remain within the no motion range, for the weigh to
be considered ‘stable’. Default value 1000
0
T 1
3
4
0
T 1
0
T 1
T
T
T
2
SELECT THE LOW PASS FILTER CUT OFF FREQUENCY. (RANGE 0 - 8)
Use the UP/DOWN keys to select the cut off frequency required. A setting of 0 will disable the filter in both FIR &
IIR modes. A setting of 1 provides the least filtering and a setting of 8 provides the most. Default setting 4. See
Filter Level (FL) versus Cut off Frequency tables on the next page.
3
4
3
4
SELECT THE NUMBER OF FILTERED READINGS AVERAGED (RANGE 0 - 7)
Use the UP or DOWN key to select the number of readings from the IIR or FIR filter that will be averaged.
Default setting 0 (off). See Update Rates versus Number of Samples table on the next page.
0
T 1
T
T
T
2
0
T 1
3
4
T
T
T
2
0
T 1
0
T 1
T
T
T
2
SET THE NO MOTION RANGE. (RANGE 0 - 65535)
Use the UP/DOWN & MOVE RIGHT keys to set the no motion range. Fluctuations in
weight values inside this range will be considered as ‘stable’. Default value 1
0
T 1
3
4
Page 14