TECshow NEBULA FX 3-in-1, Руководство пользователя

Страница: 6 / 26

NEBULA FX 3 IN ONE
P. 6
ENGLISH VERSION
•
There are total four operating buttons on the con-
trol panel, you can simply set the starting address, run the
pre-programmed program or make a reset.
•
<Mode/Esc>: Used to scroll through the current
operating mode, as well as back out of the current
menu option.
•
<Up> : Used to select increasing advancement in
the value.
•
<Down> : Used to select decreasing advancement
in the value.
•
<Enter> : Used to select a value and store it to
memory.
•
The control panel shows the current state of the
unit. It is used to select the operating mode, as well as the
sub-features. For a detailed lay out of the control panel
functions, please see the following page.
4. Function setting
Set DMX address
1. Pres s MENU to enter EDIT interface
2. Press UP/DOWN to choose, then press ENTER to en-
ter Address setting
3. Press Up/Down to choose address 001~XXX
4. Press ENTER to confirm, or press “MENU” to exit
Select channel
1. Press MENU to enter EDIT interface
2. Press
UP/DOWN
to choose, then press
ENTER
to
enter Chnd
3. Press UP/DOWN to choose 7CH or 34CH
4. Press ENTER to confirm, or press “MENU” to exit