5.3 Set IP Address
Enter into the main menu by press MENU button, then press-
ing UP / DOWN to choose the
Set IP Address option and then
press the ENTER to confirm your selection. Now you can set
I
P address by pressing UP and DOWN . Confirm you change
and move to next option by press the ENTER and UP/DOWN.
5.4 Set Netmask
Enter into the main menu by press MENU button, then press-
ing UP / DOWN to choose the
Netmask option and then press
the ENTER to confirm your selection. Now you can set
Net-
mask by pressing UP and DOWN . Confirm you change and
move to next option by pressing the ENTER and UP/DOWN.
5.5 Set DMX port
Enter into the main menu by press MENU button, then
pressing UP / DOWN to choose the
DMX port X option and
then press the ENTER to confirm your selection. Then you
can set the parameter of the each port by pressing the EN-
TER and UP/DOWN.
Please note: Each of the IP address should be unique.
Set DMX Port X
parameters
Disp Type
Decimalism or hexadecimal system
DMX Status
Input, output, disable
DMX Mode
Normal input,
backup input,
single universe data-out,
two universe data HTP-out,
two universe data LTP-out
Protocol
ArtNet sACN(E1.31), KlingNet
Framerte/fs
Data out rate:10~40 f/s
Network
Set the DMX network parameters
Sub Network
Set the DMX sub network parameters
Principal
Set the first universe parameters
Secondary
Set the second universe parameters
Resend
Resend universe parameters
Pixel Type
RGB, RGBW, RGBA, RGBD,RGBAW
Pixel Width
Set the pixel width
Pixel Height
Set the pixel height
p. 3
NAVIGATOR NODE
ENGLISH VERSION
