background image

C. OPERATION:

CH1

0-255

CH3

0-255

CH2

0-255

After power on, Press “MODE” button to activate the main menu: Built-in program, Auto run, DMX

mode, Slave mode, sound mode. 

“SETUP” is to set the relative specification for current mode.  

“UP” is to add the value of current specification.

“DOWN” is to decrease the value of current specification. 

Built-in programs-- running one of 12 built-in programs.

Auto run—running built-in programs one after another in continuous loop.

DMX mode--controlled by DMX controller

Slave mode—the projectors in this mode will be synchronously run with the projectors in master

mode.

Sound mode-- running by sound - activated.

1. Built-in programs mode

With LED dancing floor 100x100cm yon can select 12 different Programs.  Press“SETUP” and “UP”

“DOWN” buttons to select the programs (                 ) and select the desired program value

For example,

When it shows                 , press “SETUP” button for the first time, it will show               , you can set

the running speed for this program.  Press “SETUP” button for the second time, it will show              , 

then you can set the flash frequency for it.. for this PG01, if press “SETUP” for the third time, it will

show: C1-1 or C2-1, you can select one of the seven colors by up and down. 

SP- speed 00-99

FS—flash frequency from 00-99

2. Auto run mode

You can press “MODE” button to select auto run mode, it shows                 , then you can press

“SETUP” button, it shows                , then you can set the running times by “UP” and “DOWN”.

Press “SETUP” button for the second time, it will show                , you can set the running speed for

this program. Press “SETUP” button , it will show                , then you can set the flash frequency for

it.

 

You can control the devices individually via your DMX-controller. Press “MODE” button, when it is   

                , it is DMX mode. Press “SETUP” button, it shows                  , this means DMX address is

001, you can set the DMX address by “UP” and “DOWN” buttons. If press “SETUP” button, it will

show:                   or                    or  

13.CH.

 or                , it means the LED dancing panel is in which

DMX mode. You can switch these DMX modes by “UP” and “DOWN” buttons. 

3. DMX mode 

DMX value as follows: 

03CH

R

G

B

Содержание Floor TEC






Отзывы: