TECshow Cubex 360, Руководство пользователя

Страница: 10 / 34

CUBEX 360
P. 10
ENGLISH VERSION
1. Press Enter into Gren.
2. Press
Up/Down,
Choose ‘
000~255’
3. Press Enter to confirm, or press “MENU” to exit.
Blue
1. Press Enter into Blue.
2. Press Up/Down choose ‘000~255’
3. Press
Enter
to confirm, or press “
MENU”
to exit.
White
1. Press Enter into Whit.
2. Press Up/Down c hoose ‘000~255 ’
3. Press < Enter> t o confirm, or press “ MENU ” to exit.
Strobe
1. Press Enter into Stro.
2. Press Up/Down choose ‘000~255’
3. Press Enter to confirm, or press “ MENU ” to exit.
Dimmer
1. Press
Enter
into
Dim.
2. Press Up/Down choose ‘000~255’
3. Press Enter t o confirm, or press “ MENU” to exit.
LED
1. Press
Enter
into
led.
2. Press Up/Down choose ‘000~255’
3. Press Enter to confirm, or press “ MENU” to exit.
LED setting
1. Press
MENU
to enter
EDIT
interface.
2. Press UP/DOWN to choose, then press ENTER
to enter LED.
3. Press Up/Down to choose ‘ ON’/‘OFF’
4. Press
Enter t
o confirm, or press
“MENU”
to exit.
Display reverse setting
1. Press MENU to enter EDIT interface.
2. Press
UP/DOWN
to choose, then press
ENTER
to enter Disp .
3. Press Up/Down to choose ‘ON’/‘OFF’
4. Press Enter to confirm, or press “ MENU” to exit.
Whole test
1. Press ENTER to enter EDIT interface
2. Press UP/DOWN , then press ENTER Test to do whole test
3. Press Enter to confirm, or press “MENU” to exit.
Operate time
1. Press ENTER to enter EDIT interface
2. Press UP/DOWN , then press ENTER Fhrs
to check the light’s working time
3. Press Enter to confirm, or press “MENU ” to exit.
Software Version
1. Press ENTER to enter EDIT interface
2. Press UP/DOWN , then press ENTER Ver to
check the light’s version information
3. Press Enter to confirm, or press “MENU” to exit.
Whole reset
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER
to enter Rest.
3. After reset, it will go back to the upper interface
Restore factory settings
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER
to enter Defa.
3. Press Enter to confirm,or press “MENU” to exit.