TECshow COSMO UV, Руководство пользователя

Страница: 5 / 10

P. 5
| Tecshow Cosmo UV
English version
Notice: Be sure to follow 2 & 3 when making your own
cables. Do not connect the cable´s shield conductor
tto the ground lug or allow the shield conductor
to come in contact whith the XLR´s outer casing.
Grounding the shield could cause a short circuit and
erratic behaviour.
• When longer runs of cable are used, you may
need to use a terminator on the last unit to
avoid erratic behaviour.
• Termination reduces signal transmission
problems and interferance. It is always
advisable to connect a DMX terminal, (resistance
120 Ohm 1/4W) between pin 2 (DMX-) and pin 3
(DMX+) of the last fisture.
DMX512 Control
CH Value Function
CH1 0-255 Master-Dimmer
CH2 0-255 UV
CH3 0-255 UV
CH4 0-255 UV
CH5 0-255 Strobe Control
CH6 0-255 Speed
CH7 0-255 Macro function
common
DMX-512 out
3-pin XRL
DMX-512 in
3-pin XRL
XLR MALE SOCKET XLR FEMALE SOCKET
Figure 3
Figure 2
XLR Pin Configuration
Pin 1: Ground
Pin 2: Negative
Pin 3: Positive
Design and product specifications are subject to change without prior notice.