COLOR OF INDICATOR LIGHTS
1.
BLUE lights represent the Preheating and Making Espresso Coffee State
2.
WHITE lights represent the Frothing Milk State
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the appliance with warm water as
follows:
3.
Pour water into water tank, the water level should not exceed the “MAX” mark in the tank.
Then close the water tank cover.
Note
: the appliance is supplied with a detachable tank for easy cleaning, you can fill the tank with
water firstly, and then put the tank into the appliance.
4.
Set steel mesh into filter (no coffee in steel mesh).
5.
Place an espresso cup (your cup) on drip plate. Make sure the espresso/steam knob is on the
“
” position.
Note:
the appliance is not equipped with jug, please use your jug or coffee cup.
6.
Connect to power source, press the ON/OFF switch, all indicator lights will flash in BLUE
color as the appliance starts heating.
7.
When the BLUE indicator lights stop flashing, it shows the heating is finished. Turn the
espresso/steam knob towards “
” symbol
，
then press one of the button. The water will flow out
and the indicator light will flash when working.
8.
When the appliance stops pumping water automatically, you can start to brew espresso.
Note: There may be noise when pumping the water on the first time, it is normal, the
appliance is releasing the air in the appliance. After about 20s, the noise will disappear.
PRE-HEATING
To make a cup of good hot Espresso coffee, we recommend you preheating the appliance before
making coffee every time, including warming the filter, steel mesh and cup, so that the coffee
flavour cannot be influenced by the cold parts.
1.
Remove the detachable tank and fill it with desired water, the water level should not exceed
the “MAX” mark in the tank. Then place the tank into the appliance properly.
2. Set steel mesh into filter, make sure the tube on the filter aligns with groove in the appliance,
then fix the filter into the appliance from the “
” position to the “
” position firmly.
3. Place an espresso cup (your cup) on removable drip plate.
4. Then connect the appliance to power source. Make sure the espresso/steam knob is on the
“
” position.
USER MANUAL
EN
6
